Powerline 500 WiFi Access Point (XWNB5602) Installation Guide
Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. Phone (US only): 1-888-NETGEAR Phone (Other Countries): Visit http://support.netgear.com/general/contact/default.aspx.
Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Install the Adapters and Surf the Web with WiFi . . . . . . . . . . . . 6 Install NETGEAR genie. . . . . . . . . . . . . . . . . . . . . . . . . .
Package Contents XWN5001 XAV5602 Ethernet cables (2) NETGEAR recommends that you do not plug a Powerline device directly into a power strip.
Hardware Features Powerline 500 WiFi Access Point (XWN5001) Power LED Powerline LED Powerline 500 Adapter (XAV5602) Factory Reset button Wireless LED Security button Power LED Factory Reset button Powerline LED Ethernet LED Security button Ethernet ports On/Off switch Ethernet LED 3
LED Descriptions The LEDs indicate the status of your Powerline devices. • When you plug in the Powerline device, the Power LED lights and turns green. • The Ethernet LED lights and turns green when you connect a powered-on Ethernet device to at least one Ethernet port. If the LED is off, there is no Ethernet connection. The Wireless LED lights and turns green when the wireless radio is on. • • The Powerline LED lights when the Powerline device detects at least one other compatible Powerline device.
Button Descriptions The buttons on your Powerline devices let you do the following: • • • Factory Reset button: Use the Factory Reset button to return your Powerline device to its default factory settings. Press the Factory Reset button for 2 seconds, and then release it. Power On/Off switch: Use the On/Off switch to turn the device on and off. Security button: The Security button has two functions: - Secure the Powerline network.
Install the Adapters and Surf the Web with WiFi 1. Secure your Powerline network. a. Make sure that the Power LED is solid green on each Powerline device. b. On the XAV5602 adapter, press its Security button for 2 seconds, and then release the button. The Power LED blinks green while the adapter is setting up security. c. Within 2 minutes, go to the XWN5001 access point and press its Security button for 2 seconds, and then release the button. d.
The Powerline devices can communicate over the Powerline network in a secure way. 2. Plug the XAV5602 into a wall outlet near your router or gateway. 3. Connect the XAV5602 through the LAN port with an Ethernet cable.
If you want to share Internet access across your home, make sure to connect the XAV5602 to your Internet gateway with an Ethernet cable.
4. Plug the XWN5001 access point into a wall outlet where you need WiFi coverage. Note: You can connect an Ethernet-based device (like a game console, set-top box, or Blu-ray player) to the Internet and the home network with the additional Ethernet port on the XWN5001.
5. Set up WiFi access on your XWN5001 access point. You can set up WiFi access on your XWN5001 access point in one of two ways: • Option 1: Use NETGEAR genie to manually configure the wireless settings of your XWN5001 access point. a. Install NETGEAR genie. (See Install NETGEAR genie on page 18.) b. Temporarily connect your computer directly to the XWN5001 through the Ethernet port. c. Launch NETGEAR genie on your computer and click Network Map or select it from the menu.
d. Click the Powerline icon on the Network Map screen. The Powerline Utility screen displays: Powerline icon XWN5001 icon e. On the Powerline Utility screen, right-click the XWN5001 icon.
f. From the pop-up menu that displays, select Wireless configuration. g.
If you want to clone your existing wireless network, enter the same wireless settings that your router or gateway uses. When you are roaming in your house, your wireless client (laptop, tablet, or smartphone) switches from one network (router or gateway) to the other (XWN5001), depending on the signal quality. If you want to create a new wireless network, enter new wireless settings. Creating a new wireless network lets you have a second network in another zone of your house. h.
• Option 2: Use the web browser setup guide to manually configure the wireless settings of your XWN5001 access point. On your computer or wireless device (tablet, smartphone): a. Open the software that manages your wireless network connections and connect to the XWN5001 network. Tip: The default wireless network name (SSID) of the XWN5001 is NETGEAR_EXT. The default network key (wireless security password) is printed on the back of the XWN5001.
b. On the same computer or wireless device, open a web browser window. The browser takes you directly to the onscreen setup guide. If it does not, enter one of the following into the browser address bar: www.mywifiext.net www.netgearextender.net c. When prompted to log in, enter: • User name: admin • Password: password The web browser setup guide helps you configure the wireless settings of the XWN5001.
If you want to clone your existing wireless network, enter the same wireless settings that your router or gateway uses. If you want to create a new wireless network, enter new wireless settings. Creating a new wireless network lets you have a second network in another zone of your house.
6. Connect your wireless client (laptop, tablet, or smartphone) to the XWN5001 for Internet access. • Option 1: Use the WPS button on your wireless client to automatically connect to the XWN5001 access point. a. Press and hold the Security button on the XWN5001 for 2 seconds and release it. The Wireless LED starts to blink. b. Press the WPS button on your wireless client for 2 seconds and release it.
Install NETGEAR genie Follow these instructions to download and install NETGEAR genie on your computer. 1. Type http://support.netgear.com into your browser address bar. 2. Click the For Home button. 3. In the search box, type xwn5001. 4. Download the NETGEAR genie that corresponds to your OS environment (Windows or Mac). 5. Run the file that you downloaded and follow the onscreen instructions to install NETGEAR genie.
Compatible NETGEAR Powerline Devices Your Powerline devices can share a Powerline network with these compatible NETGEAR devices: XAVB1301, XAVB1401, XAVB2101, XAVB2602, XAVNB2001, XAVB5601, XAVB5101, XAVB5201, XAVB5602, XAUB2511, XAVB5004, XAVB1004, XWNB5201, and XWNB1601. For a complete list of HomePlug AV certified devices, visit www.homeplug.org/certified_products.
Safety Information AC input: 100–240V, 250 mA or 0.25A (max.) Operating temperature: 0°C–40°C User Manual You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. Compliance For the complete EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. This symbol appears in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE directive).
NETGEAR, Inc.
