User Manual

12
4.1.2 Initial configuration over Wi-Fi - only NETIO 4 and NETIO
4All
By default, NETIO 4 and NETIO 4All act as a Wi-Fi access point. They can be connected to from a Wi-
Fi client device without a wired network.
The procedure depends on the operating system. For example, in Windows 10, go to
Settings > Network & Internet > Wi-Fi > Show available networks
and select the Netio4 network. After selecting the network, enter 12345678-Netio4 as the network
key/default password. The DHCP server in Netio 4x automatically assigns an IP address to your
device. The default IP address of the Netio 4/4All Wi-Fi interface is 192.168.2.78 (NOTE: It is
different from the default IP of the Ethernet interface – 192.168.1.78 (eth) vs. 192.168.2.78 (wifi)).
Figure 4. Connecting to the Wi-Fi network