User Manual

13
4.2 Login to device web
To log in, use admin / admin.
(default login username / password)
4.3 Restoring factory defaults
This operation deletes all user settings and restores default values. It is useful when the device is in
an unknown state or does not behave as described in this manual. Reset to factory defaults can be
performed over the web interface (see the System settings section) or by holding down buttons 1
and 2 while powering up the device. Hold the buttons pressed until the device beeps twice. After
restoring the defaults, NETIO 4x again beeps twice.
Forgotten password
The reset to factory defaults is most often used when the password has been forgotten.
After restoring the factory defaults, the username and password to access NETIO 4x will
be “admin” / “admin”.