User Manual

27
5.2.2 TELNET/KSHELL
Figure 13. Configuring the TELNET/KSHELL protocol
Enable Telnet/KSHELL Enables Telnet/KSHELL functions in the system kernel.
Port Port where the device listens for Telnet/KSHELL M2M API commands.
Range: 1 – 65535. The device warns you if you specify a port number
that is already in use. However, to be sure, we recommend to use either
the standard Telnet port 23, or port numbers above 1024.
Unlike other M2M API protocols, the Telnet/KSHELL M2M API uses internally-created users and their
privileges (admin/user/guest). These users can be configured under the Users menu entry.