User Manual

55
Figure 33. Configuring the Wi-Fi network IP parameters in the Wi-Fi Client mode
Select DHCP, if it is available in your network. Otherwise, set an IP address manually. After the
configuration is finished, these settings are accessible in the Settings/Network Configuration
submenu. For a detailed description of these parameters, see the Settings/Network configuration
section.
Problems with saving the configuration?
If you have problems saving the configuration and continuing to the next step, make sure that
your Wi-Fi access point is configured with WPA2-personal security and AES or TKIP encryption.
Caution
After changing the network configuration, it may be necessary to re-discover NETIO 4/4All at
its new address. The discovery procedure is described in the Detecting and configuring the IP
address section.