User Manual

57
Figure 35. Configuring the Wi-Fi network parameters in the Wi-Fi Access Point mode
Caution
After changing the network configuration, it may be necessary to re-discover NETIO 4/4All at
its new address. The discovery procedure is described in the Detecting and configuring the IP
address section.
The NETIO Configuration mode is similar to the Wi-Fi Access Point mode; however, Ethernet and
Wi-Fi networks are isolated (no routing or bridging between Ethernet and Wi-Fi). The Wi-Fi interface
has a static IP 192.168.2.78 and an active DHCP server assigning addresses from the 192.168.2.0/24
range.
The configuration takes place in the same way as in the previous mode.