User Manual

58
5.7.2 Wi-Fi settings
Does not apply to NETIO PowerPDU 4C.
In the Settings menu, select Wi-Fi. Depending on the selected network mode (see
Settings/Network mode), the Wi-Fi interface can be in the following modes:
Inactive – in the Cable network mode.
Access point – in the NETIO Configuration network mode (no bridging between Ethernet and Wi-Fi)
and the Wi-Fi Access Point network mode (active bridging between Ethernet and Wi-Fi).
Figure 36. Wi-Fi configuration in the Access Point mode
Mode
Shows the Wi-Fi mode.
Network SSID Enter the SSID identifier of your wireless network.
Security Security mode of the wireless network, if any.
Encryption
Encryption method in the wireless network, if it is secured.
Password
Password for accessing the wireless network, if it is secured.