User Manual

68
Firmware installation causes the NETIO 4x to restart. Do not power off or restart the device
during the process; otherwise, the firmware could be damaged, rendering the device
inoperable.
The progress of the installation is indicated. When the installation finishes, a message about a
successful update appears and you will be taken back to the login screen. During the firmware
update, the red LED of output 3 flashes and the red LED of output 4 is lit (see chapter LED
indicators).
5.7.8 System
This section allows performing basic settings and viewing basic parameters.
Figure 46. System settings and status
Uptime Time since the last restart of the device.
Firmware version
Device name
Version currently installed and a link to Upgrade to a newer version.
Shown in NETIO Discover and under the device logo in the web
administration (in the figure above: myNetio under the NETIO 4 All logo
in the top left corner)
CAUTION: This value is NOT propagated into the hostname parameter in