User Manual

57
Security level (v3 only)
authPriv / authNoPriv / noAuthNoPriv
Auth protocol (v3 only)
Authentication Protocol - An indication of whether messages sent on
behalf of this user can be authenticated, and if so, the type of
authentication protocol used.
This can take one of the two values: SHA / MD5
Auth key (v3 only)
Authentication protocol password - The (private) authentication key for
use with the authentication protocol. This is a string password for MD5
or SHA depending on the choice above.
Priv protocol (v3 only)
Privacy protocol - An indication of whether messages sent on behalf of
this user can be protected from disclosure, and if so, the type of privacy
protocol which is used. This takes the value AES (DES not supported).
Priv key (v3 only)
Privacy protocol password. If messages sent on behalf of this user can be
encrypted/decrypted with AES, the (private) privacy key for use with
the privacy protocol.
Save Changes
Saves the changes.
Download MIB file
Use this button tu download MIB.
The MIB can be downloade from a device web administrator as described above.
Following standard MIBs are also required:
 SNMPv2-SMI
 SNMPv2-TC
Monitoring (read)
x = Output/Input number
Object
OID
Type
Value
example
Note
netioOutputID.x.0
1.3.6.1.4.1.47952.1.1.1.1.x.0
INTEGER
1
netioOutputName.x.0
1.3.6.1.4.1.47952.1.1.1.2.x.0
STRING
output_1
Based on user
defined name
netioOutputState.x.0
1.3.6.1.4.1.47952.1.1.1.3.x.0
INTEGER
off(0), on(1)
netioOutputStateString.x.0
1.3.6.1.4.1.47952.1.1.1.4.x.0
STRING
"off", "on"
netioOutputLoad.x.0
1.3.6.1.4.1.47952.1.1.1.25.x.0
INTEGER
24
[W]
netioOutputEnergy.x.0
1.3.6.1.4.1.47952.1.1.1.26.x.0
INTEGER
13
[Wh]
netioOutputEnergyStart.x.0
1.3.6.1.4.1.47952.1.1.1.27.x.0
DateAnd
Time
2017-6-
23,5:47:3.0,+
0:0
Initial date and
time. UTC based
netioOutputCurrent.x.0
1.3.6.1.4.1.47952.1.1.1.28.x.0
INTEGER
195
[mA]