User Manual

Wireless-N 3G Router User Manual
43 / 69
 Radio mode: You can select radio mode of wireless router, the default setting is AP mode
 SSID: The default is default
 SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast SSID
function, If the setting of this field is disable, wireless client can‟t obtain this SSID to login in,
then user have to input the SSID value manually
 Channel width: This switch allows you to set Router's wireless bandwidth. 20MHz: In this mode
you can get low bandwidth, little interference and slow rate. 40MHz: In this mode you can get
high bandwidth, high interference and rapid rate. Use only when you have a pure router, draft
802.11n wireless network
 Channel sideband: It controls your wireless router use higher or lower channel when working on
40MHz
 Region: You can select the region where you live in
 Channel: In 20MHz, you can select one channel from 1 to 14 manually, and in 40MHz, you can
select one channel from 1 to 9 or 5 to 13, which provides a choice of avoiding interference
4.5.1.2. Security
The item allows you to encrypt your wireless communication, and you can also protect your wireless
network from unauthorized user access. It supplies “None”, “WEP”, “WPA-PSK”, “WPA2-PSK”
and “WPA/WPA2-PSK” five different encryption modes.
 None
“None”means do not encrypt wireless data
Figure 4-21
 WEP