User's Manual

ADSL2+ModemRouterUserManual
30
EthernetLinkSpeed/DuplexMode:
OnLANinterfacesetup,youcanalsoconfigureeachEthernetport’slinkspeed/duplexmode.

LANPort:specifytheLANportnumberoftheswitch,itcanbeLAN1,LAN2,LAN2andLAN4
Link Speed/Duplex Mode: the mode of the selected LAN port, the default value is “Auto
Negotiation”

YoucanselectaLANporttomodifyitslinkspeed/duplexmode.

Note:
If you configure the LAN port toa new mode, such as “100Mbps/FullDuplex”, you must make
the same configuration on the PC’s NIC which the LANport is connected to, that is means you
shouldconfigurethemodeonthePC’sNI
Ctobe“100Mbps/FullDuplex”.

