User's Manual

ADSL2+ModemRouterUserManual
31
MACAddressControl:
TheroutersupportstheMACaddresscontrolonEthernetport.

MACAddressControl:selecttheLANinterfaceonwhichyouwanttorunMACAddressControl
NewMACAddress:aMACaddresstobeadded
CurrentAllowedMACAddressTable:itshowsthecurrentallowedMACaddresslist

Ifyou enabletheMACaddress control ona interface such as“LAN1”, then thetraffic from the
specified inte
rface “LAN1” only whose MAC address matches the allowed list will be flowed,
otherwisethetrafficwillbedroppedbytherouter.
4.3.2.2DHCP:
Go to the Setup‐>LAN‐>DHCP page, you can configure the DHCP mode of your ADSL Router as
None,DHCPRelayorDHCPServer.
4.3.2.2.1None
IftheDHCPmodeis“None”,therouterwilldonothingwhenthehostsrequestanIPaddressby
DHCPprotocol.
4.3.2.2.2DHCPServer
The DHCP Server is used to configure correct TCP/IP protocol re lated parameters for the
computeronyoulocalnetwork.IfyouenabletheDHCPServerfunctionoftheADSLrouter,you
can make the DHCP Server automatically configure the TCP/IP protocol parameters (such as IP
address,subnetmask,gatewayandDNSservers)forthecomputeronyoulocalne
twork.
