User's Manual

1.Package Contents
* This QIG is for all netis 150Mbps/300Mbps wireless N ADSL2+ modem routers, including
models- DL4310, DL4310D, DL4311, DL4311D, DL4312, DL4312D, DL4322, DL4322D,
DL4323, DL4323D , etc.
* The product model shown in this QIG is DL4323, as an example.
netis Wireless N ADSL2+ Modem Router Quick Installation Guide
1
2.Hardware Connection
Wireless N ADSL2+
Modem Router
Power Adapter
ADSL Splitter
Ethernet Cable Telephone Cable *2
QIG
MODEM
neti s Wirel ess N ADSL 2+ Mode m Route r
Quic k Insta llati on Guid e
2.1. Connect the ADSL line with the attached telephone cable.
Connect the LINE port of ADSL Splitter to the wall jack with a telephone cable.
Connect the MODEM port of ADSL Splitter to the ADSL port on netis Modem Router with the other telephone cable.
Connect your telephone to the PHONE port of ADSL Splitter.
Tip: If no telephone is needed, please connect the ADSL port on netis Modem Router to the wall jack with the
phone cable directly.
2.2. Connect your computer to one of the LAN ports on netis Modem Router with an Ethernet cable.
2.3. Plug the provided Power Adapter into the PWR jack of netis Modem Router and the other end to a standard
electrical socket.
2.4. Wait for one minute then check if the LED indicators of the Modem Router display normally.
PWR: Solid on.
ADSL: Solid on when the modem is synchronized.
LAN: Solid on or flashing if the corresponding LAN port is connected.
Tip: If the LED indicators display abnormally, please check if all the cables are well connected. If the ADSL LED is
off or flashing, please contact your ISP (Internet Service Provider) to check the Internet connection.
PHONE