User's Manual

Wireless AP User Manual
- 25 -
You can enable or disable the DHCP server. By enabling the DHCP server the AP will
automatically give your LAN clients an IP address.
¾ DHCP Client Range
You can select a particular IP address range for your DHCP server to issue IP addresses to your
LAN Clients.
¾ Default Gateway
The default is blank
4.2.2. DHCP info
Figure 4-4
Here shows all the DHCP Client info, IP Address, MAC Address and Lease Time
4.3. Radio
4.3.1. Basic Setting
You can configure your basic settings for you AP. It contains the following things: Radio band,
Radio Mode, channel.
¾ Radio Band
It allows you to set the AP fix at 802.11b or 802.11g mode. You also can select B+G mode to
allow the AP select 802.11b and 802.11g connection automatically.
¾ Radio Mode
It allows you to set the Wireless AP to AP, Client, WDS , AP+WDS mode .or Repeater .The
default is AP mode, it is the most common wireless mode in wireless networks connection