User's Manual

Wireless AP User Manual
- 27 -
After select ABS mode, AP will search best channel in current wireless environment when
AP start-up.
 Manual Select
Select appropriate area according to your location. For example, the range in North
America is 1-11, in Asia is 1-14.
¾ IAPP
If you enable “IAPP”, it will allow wireless station roaming between IAPP enabled access
points within the same wireless LAN.
4.3.1.2. Client
Figure 4-6
After configuring basic parameters, please configure Authentication and Encryption mode to
setup Valid and Safe wireless connection.
You can use "Association Table" to search valid wireless network
¾ SSID
Service Set ID. It uniquely identifies a logical network domain name of your WLAN. The
default value is default.
¾ Network Type
There are two types, infrastructure and Ad-Hoc. The default is infrastructure