User's Manual

Wireless AP User Manual
- 38 -
¾ RADIUS Server IP
The IP address of external RADIUS server
¾ RADIUS port
The service port of the external RADIUS server
¾ RADIUS Password
The password used by external RADIUS server.
4.5. WDS
Wireless Distribution System uses wireless media to communicate with other APs, like the
Ethernet does. To do this, you must set these APs in the same channel and set MAC address of
other APs which you want to communicate with in the table and then enable the WDS.
Figure 4-19
If you select "WDS" or "AP+WDS", please configure your AP as follows:
¾ Wireless Bridge MAC
If the work pattern of your AP is "WDS" or "AP+WDS", you should have a setting in Wireless
Bridge MAC. Enter the MAC address of another access point. Then the another access point
must be "AP" or "AP+WDS".
¾ Description
To describe your Wireless Bridge
¾ Current Wireless Bridge Information
Display information about Current Wireless Bridge. The bridge uses to connect between more
than 2APs.