User's Manual

Wireless Broadband Router User Manual
Page 22 of 40
Figure - 24
Primary AP ：The wireless router supplies the function of act as two AP simultaneously, but
because the difference of privilege, besides normal function of AP, the primary AP also has
extra function for some advanced settings and right management.
Wireless status ：Display wireless interface status is enabled or not.
Wireless Client ：Display the current number of wireless stations associated with router.
Wireless Mode ：Current wireless mode of wireless router ，the default setting is “AP(Access
Point)” mode.
Channel ：Display current channel of your wireless router.
SSID ：SSID (Service Set Identifier) is your wireless network's name shared among all points
in a wireless network. The SSID must be identical for all devices in the wireless network. So
make sure all points in the wireless network have the same SSID, we suggested to use the
default SSID.
Wireless MAC Address：The MAC address is used for wireless communication.
SSID Broadcasting：You can select “enable” or “disable” to enable or disable the broadcast
SSID function, If the setting of this field is disable, wireless client can not obtain this SSID to
login in, then user have to input the SSID value manually.
Security Mode ：Display whether your security wireless function have been applied.
z System Info:
Figure - 25
This item provides current running information of System.
z Statistics Info: