User's Manual

Wireless Broadband Router User Manual
Page 29 of 40
Figure - 32
1. Add MAC address you want to control in the “MAC address” field (the format is
XX-XX-XX-XX-XX-XX), then click “Add” button, and you will see the MAC address has
displayed in the MAC list.
2. There are two items supplied, “Permit wireless connection for MAC address listed (others
are Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”,
Select the item you want, and click “Save Settings” button.
z Association Table: Display current status of the wireless client associate with AP .
Figure - 33
z Advanced: Display current status of the wireless client associate with AP.
Figure - 34
Authentication Type : The default is set to “Auto Select”, which allows “Open System” or
“Shared Key” authentication to be used. Select “Shared Key” if you only want to use “Shared
Key” authentication (the sender and recipient use a WEP key for authentication).