User's Manual

Wireless Broadband Router User Manual
Page 36 of 40
4.10 Routing
Figure - 45
Most of broadband router and wireless router are using NAT mode, so this feature is designed
for most common network environment.
1. Destination Network or IP Address: Specify a certain destination Network or IP address
which static route forward to.
2. Subnet Mask: Subnet mask is used for distinguish Network portion and Host portion for an
IP address.
3. The Next-hop IP Address: This is an IP address of the next-hop device (and also is the
gateway address for local host) that allows forwarding data between router and remote
network or host.
4. Routing Table: You can check out all current route items , click “delete” button to delete an
route item existed in routing table.
4.11 System Management
z Password Setting: The default username/password is guest/guest. To ensure the
Router’s security, It is suggested that you change the default password to one of your
choice, here enter a new password and then Re-enter it again to Confirm your new
password. Click “Save Settings” button to save settings.
Figure - 46
z Web Setup: ”Web Remote management status” and setting for “Remote management
port”, you can configure your firewall according to your requirement.