CONTENTS 1. Package Contents 2. Hardware Information 218EV204 ooo 3. Typical Application 4.8etupWizard 5. Hardware Installation -6. Smartphone Monitor ~~ =m mmm mm 8.1 APP Download and Install mmm 6.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide 1.Package Contents The following items should be found in your package: SEVEN SECT) ERA Power Adapter 12¥I A Power Adapter {for SEVERE) (for SECEDE) Counting Kits USE Mouse Ethernet Cables for SECTION) “SEV204——4CH Wireless NVR SECT ——T20P HD Wireless IP Camera *The Mounting Kits should including plastic wall anchors and self-tapping screws. They are used for SECEDE fixing, sate of the 8EC111 with a pack of them. 2.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued LED Status Indication On The device is powered on. PWR Off The device is powered off. HDD Flashing The HDD is working properly. Off Thea is no HDD or the HDD doesn't formatted. Svs Flagging The device is working properly. Off There's a software failure. » Rear Panel LAT LANE LANE WAN Interface Description The LAN port is used to connect to IPC camera or TRANSATLANTIC | ith the IP camera through Ethernet cable.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide 2.2 SEC IR. Spotlight Bp PWR Interface Description LAN The LAN port is used to connect to LAN1T/LANZ/LAN3 port of the wireless NVR through Ethernet cable. The PWR port is used to connect to the provided PWR 12V/1A Power Adapter.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued 3. Typical Application Please check the application according to our network environment, and follow the corresponding steps for the application. Typical Application and hardware connection as follows: 12VI1A Power Adapter © Gey T ory IU Wa IP Camera Display Device 123A Power Adapter, Smartphone D USE Mouse Computer 1} Connect the provided USB Mouse to the USB Interface.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide meetup Wizard it is quite easy to configure them, here we provide step-by step configuration process of the surveillance system. Step 1: Power on the wireless NVR and wireless IP cameras, wait for 1 minute, the monitoring pictures will appear on the display screen. Now you can mount the wireless IP cameras io where you need, and please refer lo “5. Hardware Installation” to select the best position to install them.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued Step 4: Hard disk list, the HDD has been formatted in the initial state, fell-click on "Next". mr LE Es Step 5: Recording settings for each channel.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide Heep 6: Internet connection. In default the connection type is CPD, you can manually select the type and fill In the needed network parameters from your ISP. Left-click on “Next”, then the system will search IP camera automatically. Note: The wireless NVR support three Internet connection types. CPD: The wireless NVR will automatically receive the IP parameters from your ISP.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued Step 7: Video manages, here you can edit channel, set stream, match code and so on. Left-click on “Next”, Mote: If you want lo enable the buzzer alarm function. Please click on "Edit Channel”, and select stream type “Video-Alarm”. Now the function is enabled. Then go fo "Main Menu” -> “System Detection” to check "Buzzer", also you can check “E-mail Notice”, and go back to “System Setup” -> "Network Setup” to set the E-Mail.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued Step 8: Left-click on “Done”, the Setup Wizard is finished.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide HB. Hardware Installation There are three steps to install the wireless IP camera & NVR security kit: Step 1: Well locate the wireless NVR Wireless NVR is suggested to be located in the center of monitoring regional. Barrier should be avoided between wireless IP camera and wireless NVR, as the signal coverage is easily affected by the physical properties of the barrier and surrounding.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued Smartphone Monitor 8.1 APP Download and Install «iPhone & iPad Method 1: Search “TENNESSEE" in APP Store, download and install it. {Tass iPhone as example} Method 2: Scan the OR code as following Into the APP Store to download "BENET" and install it.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide 6.2 Wireless IP Camera Live View Please type your Device 1D (mass as See |D, which shown in the bottom right of your display device), and input the username “admin”, the password is empty in default, choose 4 channels, touch on “Save”, then you can see a device list. Now you can touch and connect the channels to view video by our smart mobile device.
newels 4CH Wireless IP Camera & NVR Security Kit Quick installation Glued Troubleshooting 0] How do | restore my wireless DVR's configuration to its default settings? Erwin the wireless NVR powered on, please go to “Main Menu” -> “System tools” -= “Factory setting", check the Items what you need to restore to default, left-click on "OK" to reset wireless NVR to factory default.
natl 40H Wireless IP Camera & NVR Security Kit Quick Installation Guide Appendix C: FCC Statement This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.