WF-2113 300Mbps Wireless-N PCI-E Adapter User Manual V1.
WF-2113 User Manual -1-
WF-2113 User Manual Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WF-2113 User Manual Package Contents The following items should be found in your package: ¾ 300Mbps Wireless-N PCI-E Adapter ¾ CD-ROM ¾ Quick Installation Guides Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact with your distributor.
WF-2113 User Manual Content 1 2 3 4 INTRODUCTION .......................................................................................................................5 1.1 PRODUCT OVERVIEW .....................................................................................................................5 1.2 MAIN FEATURES ...........................................................................................................................5 1.3 SUPPORTING STANDARD AND PROTOCOL ............
WF-2113 User Manual 1 Introduction Thank you for choosing WF-2113 1.1 Product Overview WF-2113 is a powerful PCI-E Adapter that installs quickly and easily into PCs. The Adapter can be used in Ad-Hoc mode to connect directly with other cards for peer-to-peer file sharing or in Infrastructure mode to connect with a wireless access point or router for access to the Internet in your office or home network. The Wireless 11N PCI-E Adapter connects with 802.
WF-2113 User Manual 1.4 Working Environment Temperature ¾ 0° to 40° C (operating) ¾ -20° to 70° C (storage) Humidity ¾ 10% to 85 % non-condensing (operating) ¾ 5% to 90% non-condensing (storage) 1.5 System Requirement You must have the following at least ¾ A desktop computer with an available PCI-E slot. ¾ At least a 300 MHz processor and 32 MB of memory ¾ An 802.11b/g/n Access Point (for Infrastructure Mode) or another 802.11b/g/n wireless adapter (for Ad-Hoc, Peer-to-Peer networking mode.
WF-2113 User Manual 2 Driver and Hardware Installation 2.1 Driver installation of the WF2113 Turn on the computer and Insert the Wireless 11N PCI-E Adapter Driver CD in the CD-ROM drive. The Install Screen will appear. If not, click the Start button and choose Run and enter D:\autorun.exe (if ‘D’ is the letter of your CD-ROM drive) Select Drivers, choose the modem of your product and operate according to the instruction. The following is the step-by-step instructions in Windows XP.
WF-2113 User Manual Figure 2-2 ¾ Click Install Figure 2-3 ¾ Click Finish to finish the driver installation 8
WF-2113 User Manual Figure 2-4 2.2 Hardware installation of WF2113 2.2.1 Install the Wireless 11N PCI-E adapter into your computer ¾ Make sure to turn off your computer and unplug the power cord. Remove the back cover of the computer.
WF-2113 User Manual 2.2.
WF-2113 User Manual 3 System configuration Use the Wireless LAN Utility to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. You can double-click the icon on your desktop to run it. Another way to start the Configuration Utility is to click Start> Programs> 11N Wireless LAN Utility> 11N Wireless LAN Utility. 3.1 General The General tab displays current Wireless statistics.
WF-2113 User Manual ¾ Link Quality: The quality of the current wireless connection. Network address ¾ MAC: The MAC Address of the Adapter. ¾ IP Address: The IP Address of the Adapter. ¾ Subnet Mask: The Subnet Mask of the Adapter. ¾ Default Gateway: The Default Gateway address of the Adapter. ¾ Show Tray Icon: Show PCI-E Wireless LAN Utility icon in the windows toolbar. ¾ Disable Adapter: Disable the wireless adapter ¾ Radio off: Turn off the radio of the wireless adapter 3.
WF-2113 User Manual profile. Figure 3-3 When the Network Info dialog box appears (the former picture), enter a name for the new profile. Enter the Network SSID. Choose the Network Authentication Mode and Data encryption from the drop-down menu and import the network key. Then click OK button. ¾ Create a new ad-hoc mode profile If you want your wireless computers communicate with each other directly, click the Add button to create a new ad-hoc profile.
WF-2113 User Manual Figure 3-5 Choose the Network Authentication Mode and Data encryption from the drop-down menu. And import the network key. Then click OK button. You have successfully created a profile. 3.2.2 Remove Select a profile and click Remove button to delete this profile (the following picture).
WF-2113 User Manual Figure 3-6 3.2.3 Edit Select a profile and click Edit button to edit this profile (the following picture).
WF-2113 User Manual Figure 3-8 Modify the profile information according to your demand. 3.2.
WF-2113 User Manual Figure 3-9 Import the new profile name in the popup window blank (the following picture) Figure 3-10 3.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility running next time.
WF-2113 User Manual Figure 3-11 3.3 Available Network The Available Network tab, displays a list of infrastructure and ad-hoc networks available for connection.
WF-2113 User Manual Figure 3-12 The section of the window displays the Available Networks. Double-click the network to which you wish to connect. Figure 3-13 Choose the Authorization modes and Encryption modes in the drop-down box. If the wireless network uses a Passphrase, enter the Passphrase in the Passphrase field.
WF-2113 User Manual network uses a WEP key, enter the WEP key in the Key field. Click the OK button to complete the network connection. 3.4 Status The Status tab displays the detailed information of current device and wireless connection. Figure 3-14 3.5 Statistics The Statistics tab display the stat. value of current wireless connection Tx and Rx, you can click Reset button to reset value and restart to count.
WF-2113 User Manual Figure 3-15 3.6 WiFi protect setup Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can through ‘PIN Input Config (PIN)’ or ’Push Button (PBC)’to encrypt your network.
WF-2113 User Manual Figure 3-16 WPS can connect the wireless adapter and the router in a safe way.
WF-2113 User Manual Figure 3-19 ¾ Select the AP that you want to connect in the pop-up window, and then click ‘Select’ Figure 3-20 ¾ Please wait until the following window appears, the connection between the adapter and the router will be established automatically.
WF-2113 User Manual be session overlap. Please using method 1 or wait for a while push the button again.
WF-2113 User Manual 4 FAQ This chapter provides solutions to problems that may occur during the installation and operation of the Wireless PCI-E Adapter. Read the descriptions below to solve your problems. 1. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. Make sure that the PC to which the Adapter is associated is powered on.
