WF2119 netis 150Mbps Wireless-N USB Adapter Quick Installation Guide V1.
Wireless-N USB Adapter Quick Installation Guide Check Your Package Contents The following items should be found in your package: ¾ Wireless-N USB Adapter ¾ Quick Installation Guide ¾ CD-ROM Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from. Before You Begin Minimum Requirements: ¾ Available USB 1.1 or USB 2.0 port ¾ 300 MHz processor and 32 MB of memory ¾ CD-ROM drive ¾ An 802.
Wireless-N USB Adapter Quick Installation Guide Figure 1 ¾ Step 1 Select language and then click “Next ”,if no such option, go to Step 2 Figure 2 ¾ Step 2 Click “Next” 3
Wireless-N USB Adapter Quick Installation Guide Figure 3 ¾ Step 3 Select setup type and then click “Next ” Figure 4 ¾ Driver is being installed, please wait.
Wireless-N USB Adapter Quick Installation Guide Figure 5 ¾ Step 4 After installation is complete, if you are asked to restart you may do so immediately, or you may choose to do so later, after closing and saving work in other programs.
Wireless-N USB Adapter Quick Installation Guide Figure 7 Insert the Wireless-N USB Adapter Plug the Wireless-N USB Adapter into an available USB port on your computer, and the Found New Hardware Wizard (windows XP) screen will appear: ¾ Select Install the software automatically (Recommended) and then click “Next” Figure 8 ¾ Click “Finish” to finish the hardware installation 6
Wireless-N USB Adapter Quick Installation Guide Figure 9 Connecting to a wireless network You can double-click the icon on your desktop to run it. Another way to start the utility is to click Start>Programs> netis 11n USB Wireless LAN Utility> netis 11n USB Wireless LAN Utility. Note: If you are using Windows XP, you can use either the Windows Zero Configuration Utility or the netis software, but netis Wireless LAN Utility is recommended.
Wireless-N USB Adapter Quick Installation Guide Figure 11 ¾ If the network you are connecting to is encrypted, you will need to enter and confirm the network key/password, then click “OK”.
Wireless-N USB Adapter Quick Installation Guide Method 2: You can follow steps below to connect to wireless network if you only install Drive without Unity in Step 3. Double click “My Network Places”, then click “View network connections” and right click “Wireless network connections” to select “Available wireless network connections”, and available wireless networks will be displayed, you can then double click on the network that you wish to connect to.
