WF-2404 Quick Installation Guide netis 300Mbps Wireless-N Broadband Router V1.
300Mbps Wireless-N Broadband Router Quick Installation Guide 1. Check Your Package Contents The following items should be found in your package: ¾ 300Mbps Wireless-N Broadband Router ¾ Power adapter ¾ Quick Installation Guide ¾ CD-Rom ¾ Ethernet cable Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from. 2.
00Mbps Wireless-N Broadband Router Quick Installation Guide 3. Hardware Installation ¾ Attach one end of an Ethernet cable to your computer’s Ethernet port, and the other end to one of the LAN ports of your router. ¾ Connect another Ethernet cable from your Cable/DSL modem to the WAN port of your router. ¾ Connect the single DC output connector of the power adapter to the power jack on the back of the router and plug the Power Adapter into an AC outlet. 4.
300Mbps Wireless-N Broadband Router Quick Installation Guide WPS Flashing slowly SYS Flashing Normal WLAN Flashing Wireless data transmitting On WAN Connection normal WAN Flashing LAN On Flashing WPS is running Data transmitting Corresponding LAN port connection normal Corresponding LAN port data transmitting 5. Configure Your Computer You can manage the 300Mbps Wireless-N Broadband Router through the Web browser- based configuration utility.
300Mbps Wireless-N Broadband Router Quick Installation Guide Figure 5-1 ¾ Select obtain an IP address automatically and obtain DNS server address automatically, click OK Figure 5-2 ¾ Back in the previous window, click OK 4
300Mbps Wireless-N Broadband Router Quick Installation Guide 6. Log In to Router Interface ¾ Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just connected to the router, type http://192.168.1.1 in the address bar, and press enter Figure 6-1 ¾ In the pop-up window, enter the user name guest and password guest and then click OK Figure 6-2 ¾ After you have logged in, the router's user interface will be displayed.
300Mbps Wireless-N Broadband Router Quick Installation Guide 7. Router Setup 7.1. Internet Connection Settings ¾ Most connections utilize a dynamic IP (DHCP) and the default is already set to this. If you have another connection type (like static IP), you will need to click on ‘Convenient Setup’ in the menu and input information given you by your service provider and then click save. Figure 7-1 ¾ You may already be connected to the Internet.
300Mbps Wireless-N Broadband Router Quick Installation Guide Figure 7-2 ¾ If you are still not connected, or experience an erratic connection, your modem may have the same IP as the router (192.168.1.1). You will need to change the router's IP. Click on ‘LAN Setup’- ‘LAN IP Address’ and you will see this IP in the main interface. You may edit it to something different (192.168.2.1 for example).
300Mbps Wireless-N Broadband Router Quick Installation Guide for a few seconds (2-6s) with a pencil when it is working, then release and it will restore settings to the factory configuration. The other way to restore factory settings is through the same user interface used in setup. Click on ‘System management’- ‘Restore’, and click on the ‘Restore’ button. 7.2.2. Password Change You may wish to change the router's password.
300Mbps Wireless-N Broadband Router Quick Installation Guide ¾ If you want to use WPA/ WPA2/ WPA&WPA2 to encrypt, you can select ASCII characters (alphanumeric format) or Hexadecimal digits (‘A-F’, ‘a-f’ and ‘0-9’). No matter what type you select, input 64 Hex values (in the ‘A-F’, ‘a-f’ and ‘0-9’ range) or 8-63 ASCII characters. Figure 7-5 ¾ You can use WPS (Wi-Fi Protected Setup) to secure your wireless network if the connecting wireless device is also WPS enabled.
300Mbps Wireless-N Broadband Router Quick Installation Guide Method 2: PIN Select this router for connection in your OS network connections or wireless adapter software settings Choose to enter the WPS PIN of the router and provide default router WPS PIN printed on label on bottom of router.
300Mbps Wireless-N Broadband Router Quick Installation Guide Figure 7-7 ¾ Click on ‘Wireless Management’- ‘AP Setup’ - ‘WDS.’ You may choose to click on AP Scan to scan for R2, select R2 in the window that appears and click on the connect button at the bottom of the list in this window. The SSID/name and MAC address of R2 will automatically be entered, and you can click on the Add button to finalize. Alternatively, you may manually enter the name and MAC address of R2 then click add.
300Mbps Wireless-N Broadband Router Quick Installation Guide ¾ Click on ‘Wireless Management’- ‘AP Setup’ - ‘Security’ and select and the same WDS security settings as for R1 ¾ Click on ‘Wireless Management’- ‘AP Setup’ - ‘WDS.’ You may choose to click on AP Scan to scan for R1, select R1 in the window that appears and click on the connect button at the bottom of the list in this window. The SSID/name and MAC address of R1 will automatically be entered, and you can click on the Add button to finalize.
