User's Manual

WF-2409 Quick Installation Guide
15
 User Name
Iput User name your ISP provides
 Password
It is provided by your ISP
3.1.6. Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is ”enable”. If you chose the “Disable” status, the router will become a wired broadband
router without wireless function, so be careful when you choose this status.
 SSID
SSID (Service Set Identifier) is your wireless network's name shared among all points in a
wireless network. The SSID must be identical for all devices in the wireless network. It is
case-sensitive and must not exceed 32 characters. Make sure all points in the wireless network
have the same SSID. For added security, you should change the default SSID to a unique name
 Security
The item allows you to encrypt your wireless communication, and you can also protect your
wireless network from unauthorized user access. It supplies “None”, “WEP”, “WPA-PSK”,
“WPA2-PSK” and “WPA/WPA2-PSK” five different encryption modes. And you can also use
WPS function and then it will be encrypted to WPA2-AES mode automatically
Now you have finished the configuration of this WF-2409. Congratulations！