R netis Wireless N Router Quick Installation Guide
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: 1.
netis Wireless N Router Quick Installation Guide 1.Package Contents netis Wireless N Router Quick Installation Guide Power Adapter Wireless N Router QIG Ethernet Cable *This QIG is for all netis 300Mbps Wireless N Router, including models- WF2419/3001473 * The product model shown in this QIG is WF2419, as an example. 2.Hardware Connection xDSL/Cable Modem POWER POWER LINE IN Notebook with wireless network adapter 5 CABLE CABLE Computer with wired network adapter 2.1. Power off your Modem. 2.
netis Wireless N Router Quick Installation Guide 3.Configure the Router via Web Management Page 3.1. Set the IP address of the wired network adapter on your computer as“Automatic” or “DHCP”. For Windows 8/ 7/Vista 1) Go to “Settings” (Win 8)/ “Start” (Win 7/Vista)> “Control Panel”. 2) Left-click on “Network and Internet”> “Network and Sharing Center”> “Change adapter settings” (Win 8/7)/ “Manage network connections” (Win Vista). 3) Right-click on “Local Area Connection” and left-click on “Properties”.
netis Wireless N Router Quick Installation Guide 3. 3. Select the language as you need on the top box,default is in English. 1) In “Quick Setup” page, select your Internet Connection Type. If “DHCP (Cable Modem)” is selected, the router will automatically receive the IP parameters from your ISP (Internet Service Provider). If “Static IP” is selected, please enter the IP Address/Subnet Mask/Default Gateway/DNS Servers given by your ISP.
netis Wireless N Router Quick Installation Guide 4.Troubleshooting Q How do I restore my netis Router's configuration to its default settings? A With the router powered on, use a pin to press and hold the Default button on the rear panel for 8 to 10 seconds before releasing it. The router will reboot and all configurations are back to factory default. Q What can I do if my Internet cannot be accessed? A 1) Check to verify the hardware connections are correct.
