ONTOLOGY MINI 13200mah DC UPS / POWER BANK UPS USER MANUAL Thank you for choosing our UPS, Before operating this unk, ‘ase read the user manual carefully to ensure that the lest possible performance is obtained.
UPS | XY. Cable 1 x User Manual | NOTE: Power adapter not included. Please ensure that » 12 DC power adapter Is used. ‘Work LED Charge LED 12V DE Input Part: (1. Imm) 12V DC Output Port (25mm) # the Charge LED ix flashing (red), then the UPS is charging. % If the Charge LED is solid green, then the UPS is fly charged. 5 If the Cage LED is off then there it no parer adapter powering the Input port. If the Work LED Is solid from sham the Y-Carla and devils have been connected to the Output port.
1 ®90S8 QQ BBB Emergency uninterruptible power supply perfect for load shedding. High-output power (30W). High-capacity (13200mAh) Lithium-ion battery. Safeguards against power surges, spikes, dips and allure, Protects voltage expansive devices, Intelligent voltage regulation. Provides backup power: between 4 to 10 hours (pendant on the number of connected devices). Includes Y-Cable to connect 2 devices, such az wireless router and Fiber ONT.
«A 12V DC 2.5A max upstart is required to power the UPSIDE Input. This adapter Is not Included with the device, Lie your Router’s existing 12V DC power adapter tn power the PHILIPS, «ONLY connect 2 devices to the Y-Cable ff they have the same Voltage rating and they are close enough to each other for the 2 ans of the Y-Carla to reach both devices. IMPORTANT: It Is the user’ responsibility to ensure that their devices are connected correctly and to the correct and appropriate { outputs.
I 12V DC @ 2.5 Amp max. me Mus Po war Ad spear | |7V DC {Not Inclined) Vo Output pare VOI ares Amp max. Mex Dewar Power J0W Type Lithium fon Opacity 13200mAh Clangor Puff 12 hours Unit Dimensions {rer} 130% 75 x42 mn Parsing Temperatures RC-asC Input and Output Poi arty — + * Product specifications are subject to change without notice. * To ensure the moiety during transportation, the baser Is not fully charged when leaving the factory. Pleas charge before use.
pL The PHILIPS &s rated to provide 12V DC 2.5A max. Do not exceed the maximum load they can be supplied by the device. f the UPS Er Lt Tau] before storing In a cool, dry place. I the UPS has been In storage EE LL pm LED rns sold groan. ft Is recommended that the UPS battery Is patty YL I. Ways check the working voltage, current and polarity of tho loads bafflers connecting them to tha LPS, connecting them to the appropriate voltage output.
