User's Guide

13 14
Camera
1080p (1980x1080), 3.0M, 1/4"
2.4GHz
h.264 (frame rate = 18fs)
5
V / 2A, 2.5m-long USB-C Charging Cable
38 degrees vertical (Up=90, Down=18)
169 degrees horizontal (Left=135, Right=135)
Zoom In (2X)
Zoom In (4X)
1.5m to infinity
Black & White image, up to 2m clear range
Non-visible IR LED with wavelength 940nm (x 12 pcs)
Yes
Yes
-10°C ~ 55°C / 14 - 131°F
0°C ~ 40°C / 32 - 104 °F
Cmos
Connectivity
Image Compression
Power Input
Pan-n-Tilt
Zoom
Lens Focal Length
Night Vision
IR LED
Light Sensor
Two-Way Talk
Storage Temperature
Operation Temperature
· Check that the camera and monitor are turned on.
· Check the camera is connected to power properly (it
cannot be charged; it’s power off once disconnected from
power).
· Check that the monitor is of enough battery (it’ll auto shut
off when battery level icon flashes red slowly on the
monitor).
· Check whether the camera is near the monitor (recom-
mended to keep within 1.5-2m / 4.9-6.6ft).
· Check whether the monitor is of low battery. Charge it in
time to restore good connection.
· Check whether the camera is well connected to power.
· Check whether there are any large metallic objects
including doors, refrigerators, mirrors, etc., are placed
between the camera and monitor thus blocking the radio
signals.
· Check whether there’s any other 2.4GHz product is used
nearby like WiFi routers, microwave ovens, which may
interfere the connection.
· If nothing above is involved, please retry to pair:
Press and hold the OK button on monitor to enter pairing
mode, and the monitor will connect with the camera nearby
automatically.
· Check all connections to the camera (power cable plugging
and pairing).
· Check whether the screen is in sleep mode. Press any
button to awake it.
· Check whether the camera is within range of the monitor.
· Adjust the monitor antenna to vertical position for better
signal transfer.
Product not
powering on?
Baby monitor can’t
connect with the
camera?
Nothing shown
when I view a
camera?
TROUBLESHOOTING