User's Guide

09 10
You can switch viewing different cameras; the current camera number will
be shown with the Camera icon on the monitor.
You can only select one camera to view at one time.
2. Add / View / Delete a Camera
1) Press Menu button, select through > > to add a camera.
2) Select through > to view a camera.
3) Select through > to delete a camera.
For system sound adjustment, please go to Monitor Settings >
System sound volume .
3. Digital Zoom & Circulating
Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A
third pressing of the button will restore to the original image.
Press and hold OK Button 4 seconds to start auto circulating, press OK
again to stop.
4. Pan-n-Tilt
When viewing the camera, press Left / Right / Up / Down Button to view
at different angles, 38 degrees vertically and 169 degrees horizontally.
· When the timer is set, the Alarm icon will be shown on the
monitor.
· Before setting, please check that the monitor time is your current time.
6. Night Vision
The night vision is automatically activated in a dim environment. The
camera has 12 high-intensity infrared LEDs for picking up clear images in
the dark. Black and white images can be captured within 2m distance.
7. Alarm
Press Menu Button > Right Button to locate Alarm menu > OK Button >
Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or
6Hr alarm, or set the hour and minute otherwise. When the alarm time is
reached, a beep will be heard. Press OK Button to stop; otherwise it’ll
keep beeping for 30s, beeping again in 1min, stops after it’s alerted 3
times.
5. Volume Adjustment
Press Menu Button -> OK Button -> Left / Right Button to volume down /
up, and OK Button to saving your settings.
· To mute the sound during poor monitor-camera connection, please set
the system sound volume to mute.
· When the monitor screen is under sleep mode, the power indicator
flashes green slowly while the audio is still on; press any button to awake.
You can also short press the Power Button to turn the screen off.
· Press and hold the Power Button to power on / off the monitor.
The current zoom level number will be shown with the Zoom icon
on the monitor.