Owner manual

IP Setup 7-35
Select Add Virtual Router and press Return.
The Add Virtual Router screen appears.
• VRID – Enter a VRID value. Each logical IP interface can have a maximum of two Virtual Routers. A Virtual
Router is identified by its Virtual Router Identifier (VRID). The VRID must be unique within the IP interface.
• Virtual IP Address – Enter a Virtual IP Address. Each Virtual Router can have one associated Virtual IP
Address. The Virtual IP Address (VIP):
• must be in the range of IP addresses covered by the IP interface or the subnets
• must not match the IP address of any other VIP
Ethernet LAN VRRP Options
Display/Change Virtual Routers...
Add Virtual Router...
Delete Virtual Router...
Monitor WAN: Yes
Serve/Relay DHCP only if
Virtual Router in Master state: No
DHCP Gateway IP Address: 0.0.0.0
Add Virtual Router
VRID: 0
Virtual IP Address: 0.0.0.0
Priority: 100
Preempt Mode: Yes
Advertisement-Interval: 1
Enable: No
ADD VIRTUAL ROUTER NOW CANCEL
Enter a value between 1 and 255.