Owner manual

3-14 Firmware User Guide
Caution!If you enable 802.1x for a VLAN that includes a wireless SSID, you must access the Wireless LAN
Configuration menu and set Enable Privacy to WPA-802.1x as well. See “Enable Privacy” on page 3-26. If
multiple SSIDs are split across several VLANs, the VLANs must either:
• all have 802.1x enabled with WPA-802.1x enabled in Wireless Privacy, or
• have the VLANs set to 802.1x disabled and Wireless Privacy set to some other privacy setting. In that case
Wireless Privacy can be any setting. Wireless does not currently support separate privacy modes per SSID.
When enabling WPA-802.1x, wireless will default to the RADIUS configuration specified in Advanced Security
Options (see “Advanced Security Options” on page 10-6), unless it is part of a VLAN. If it is part of a VLAN it will
use the VLAN authentication profile's specified RADIUS server.
Select Add RADIUS Profile and press Return.
Add VLAN...
VLAN ID (1-4094): 10
VLAN Type... global
VLAN Name: Network A
VLAN Network: Primary LAN
+----------Profile Name-----------+
802.1x: +---------------------------------+
Authentication Profile... | <Add RADIUS Profile> |
| |
Once a VLAN has been successfully| |
"Add Port Interface" option of th| |
+---------------------------------+
ADD VLAN CANCEL