Owner manual

3-28 Firmware User Guide

• WPA Version: If you select either WPA-802.1x or WPA-PSK as your privacy setting, the WPA Version

pop-up menu allows you to select the WPA version(s) that will be required for client connections. Choices

are:

• All, for maximum interoperability,

• WPA Version 1, for backward compatibility,

• WPA Version 2, for maximum security.

All clients must support the version(s) selected in order to successfully connect.

• WEP: Alternatively, you can provide a level of data security by enabling WEP (Wired Equivalent Privacy) for

encryption of network data. You can enable 40-, 128-, or 256-bit WEP Encryption (depending on the

capability of your client wireless card) for IP trafﬁc on your LAN.

Wireless LAN Configuration

Enable Wireless: Yes

SSID: 7101 3245

Block Wireless Bridging: No

Channel... +---------------------------+

AutoChannel... +---------------------------+

Closed System... | All |

Enable Privacy... | WPA Version 1 |

WPA Version... | WPA Version 2 |

Pre Shared Key: +---------------------------+

Wireless Multiple SSID Setup...

MAC Address Authentication...