- Motorola Command Line Interface Command Reference Manual

Motorola Netopia® Router CLI Commands 2-55
show interface sdsl id status
This command allows you to display the status of the specified SDSL interface. For a cell-based SDSL (R7200)
interface, the possible status strings and their meanings are:
Priority Queuing (TOS bit) Commands
interface { adsl | sdsl | t1 | serial } id priority-queuing enable { yes | no }
no interface { adsl | sdsl | t1 | serial } id priority-queuing enable
show interface { adsl | sdsl | t1 | serial } id priority-queuing enable
These commands allow you to enable, disable, or show the priority queuing (TOS) setting for the specified WAN
interface.
Status String Meaning
Connected at xxx Kbps The interface is connected to the DSLAM at the specified
speed.
Trying xxx Kbps The SDSL interface is attempting to connect to the DSLAM at
the specified speed.
Activation Backoff The SDSL interface is between connection attempts.
Down The SDSL interface is not yet initialized.
No signal from DSLAM The SDSL interface is not detecting a signal from a DSLAM.
Priority Queuing Configuration Commands
interface { adsl | sdsl | t1 | serial } id priority-queuing enable { yes | no }
no interface { adsl | sdsl | t1 | serial } id priority-queuing enable
show interface { adsl | sdsl | t1 | serial } id priority-queuing enable