- Motorola Command Line Interface Command Reference Manual

Motorola Netopia® Router CLI Commands 2-65
T1 Statistic and Diagnostic commands
show interface t1 id errors { current | interval 1..96 | total }
This command displays the error statistics for the specified T1 WAN interface for a particular 15-minute interval
during the previous 24-hour period, or the total for the past 24 hours. Specifying the keyword current displays
the error statistics for the current 15-minute interval. Specifying the keyword interval followed by an integer
between 1 and 96 displays the error statistics for a prior 15-minute interval. Interval 1 is the most recently
completed 15-minute interval, while interval 96 is the interval completed 23 hours and 45 minutes prior to
interval 1. Specifying the keyword total displays the total error statistics for the last 24 hours.
Example:
#show interface t1 1 errors interval 1
15 minutes ending 16:32:44
Errored Seconds 001
Unavailable Seconds 000
Severely Errored Seconds 001
Bursty Errored Seconds 001
Loss of Frame Count 000
Bipolar Violation Count 001
#show interface t1 1 errors total
24 hours ending 16:32:44
Errored Seconds 001
Unavailable Seconds 000
Severely Errored Seconds 001
Bursty Errored Seconds 001
Loss of Frame Count 000
T1 Statistic and Diagnostic Commands
show interface t1 id errors { current | interval 1..96 | total }
interface t1 id diagnostic mode { local loopback | normal | remote loopback |
send { all ones | blue alarm | loopback } }
show interface t1 id diagnostic mode
show interface t1 id line status
show interface t1 id loopback mode
show interface t1 id loopback status