Network Adapater User Guide

User Guide
User Guide 7-28
Chapter 7 – Advanced Mode
It provides a brief outline of the advanced features of individual hyper links on the left menu.
7.1 VOIP ATA Configuration
The VOIP ATA Configuration page allows you to set different parameters of the VoIP application.
Figure 7-1 VOIP ATA Configuration
PTM Software Version details:
This section displays the current version of the PTM module.
Service Provider To Use:
This parameter holds the service provider selected to work with the VOIP ATA for the above
chosen Line. Different service provider specific details can be configured by clicking the link
Update Service Provider. When a different service provider is chosen from the Drop-down list,
the Login Account To Use drop-down list is updated to reflect the login details available and
configured for the selected service provider.
Login Account To Use:
This parameter holds the Login Account selected to work with the VOIP ATA for the above
chosen Line and the Service Provider. Different Login Account details can be configured by
clicking the link Update User Login Account. This permits multiple logins to be created per
service provider. Further, SIP protocol also allows the same login to be used for registration
from multiple locations. So the same login under the same service provider can be used from
multiple lines.
Current Registration Status:
This field displays the current registration status of this line. If the line is registered it shows the
status as REGISTERED else it shows UNREGISTERED.