3.2.5 Composer 1) Click composer task. Please keep running composer. Do not close the program. Tool > Composer Task 2) Show NxESL Composer window.
3) Click drop down list then choose “Rebuild”. ※Due to option of "rebuild" mean only executes one time. You have to set other option in composer program except first time use. Because of the program must running regularly every for check the info. 4) Click “start”.
5) Show up the green icon mean is processing. 6) Show up the red icon mean is complete making image. ※Please maintain the program is running all the time. 3.2.6 NxEslScheduler 1) Open NxEslScheduler.exe.
update info on time. File location > LAB > NxEslScheduler.exe. 2) Please cancel tick and click run.
3) When you launch the execution file the MAC address will auto import in. ※If If MAC address is not show up in the window. Please lease reset coordinator. 4) Import data.
5) Tick “Wake up Bit Map” and click “Database” to setting up data source. 6) Open the file that is from Nx.EXE creative document. (Refer to 3 > 3.2> 2> 3.2.
) Click “ok”.
9) You will see “8 status jobs in database” that show up in the output block after you click start. Itt is mean the program is processing. (Our sample is eight ESLs.) 10) Todo block display each ESL transfer schedule.it schedule.it is display in update in Todo area. Update has five mode respectively PENDING, TRANSFERRING, TRANSFERRING, TRANSFERRED, WAKEUP, UPDATING. Done block display already ESL was complete transfer.
3.3 1) How to use barcode arcode instruction First irst of all, you have to print out the barcode instruction image. Please open NxESL.exe then click “report report”.
2) Save the image. 3) Click “ok”.
4) Open the image then print out. 5) Please open composer.exe. and launch the program.
6) Click the drop down list and setting 10 sec (suggestion option). Click “start”. 7) Choose the barcode scanner COMI.
8) After choses barcode COMI, you will hear distinct sound that mean barcode scanner connect with the system already. (The sound is depends on the barcode scanner company setting.) 9) Follow way of operation of barcode. Each scan will show up on left side in popup-window. How we use “EZ-PAIR” barcode instruction as example to pair with three goods and three labels.
Instruction PAIR Way of Operation 1. Scan label barcode. 2. Scan good barcode. 3. Scan PAIR. REFRESH 1. Scan label barcode. 2. Scan REFRESH. ACTIVATION 1. Scan label barcode. 2. Scan ACTIVATION. DEACTIVATION CANCEL 1. Scan label barcode. 2. Scan DEACTIVATION. 1. Scan label barcode. 2. Scan CANCEL. ◎Numerous labels need to update info. Instruction Way of Operation 1. Scan EZ-PAIR. 2. Scan label barcode. EZ-PAIR EZ-REFRESH EZ-ACTIVATION EZ-DEACTIVATION EZ-MODE-EXIT 3. Scan good barcode. 4.
11) Running NxEslScheduler (refer to 3 >3.2 >3.2.6 NxEslScheduler) 3.4 Other 3.4.1 Import data of goods OptionⅠUsing import When you need to add lots of goods or update goods information you could use “import” to add or update. Import > Article > open information of article> Open > chose “Insert and keep old records” > Import Data.
OptionⅡ Manual Edit > Article > Add New Article 45
Show up empty column. You can right-click on empty column. There will show up option then select “input” and fill in information of goods. You also can right-click to fix goods information.
3.4.2 Importing data of label Only use import function can add data of labels. Edit > Labels > File path to open Click “Import Data”.
3.4.3 Design template Template interface Click Tool > Template Designer Please cancel tick and click run.
You will see NxTemplate.exe. Edit new template. - Please click “file” than choses “new”.
Menu bar function is below： ： Function File Edit Tools Help Item Content New Open new template Save Save template Save as Save as other template Exit Exit the program Undo Back to previous step Redo Recovery Delete delete Too Upper Layer Move to upper layer Too Lower Layer Move to next layer Render Template Preview template Settings Chose other database View Help Help About About Image editor bar function description is from left to right： right icon item Text horizontal lin
【Select】 First, to click “select” then adjust detail about the word. You also can use mouse to move.
Click drop down list of data source in detail palette. The source is depends on what is your requirement. The source will read from database and display in template. Example is use name as data source.
Click “select” again. To adjust detail that is about the data source. There will display “price”. To adjust name of Element Name to become with price then name of Label Element is also change.
【Text】 To click icon of text then it will display in art board. In art board to adjust name of text become with money icon. The name of text of art board is change from name of text in detail palette.
To adjust name of Element Name become with unit then name of Label Element is also change. 【Block】 To click icon of block then it will display in art board. Depends on what is your requirement then adjust the detail in detail palette. You can adjust color, background color and size. Please to attention the color, when you set color that must same as color of ESL. Because of ESL has two kind of color mode. One has black, white and red. The other one only has black and white.
【Line- horizontal】 To click icon of horizontal line then it will display in art board. In detail palette, to change detail the horizontal line. You can adjust color, width, height and place.
Click icon of image then it will display in art board. Select source of picture in detail palette. Choose picture then open it. ※If the ESL color only has black and white, you only can use black and white in design template.
Adjust height and width of image.
Use mouse to moving the image. 【Barcode】 Click icon of barcode then it is displayed in art board. You can adjust the barcode source and digital. In the example below that is barcode as source. You do must to adjust the left or right. There are more than the 3 unit at least. Due to adjust, the image will able to read with barcode scanner. The digital is following with International Barcodes rule to setting.
【Move layer】 If the layer is lower, the location is high in the label element area. Such as the frame is lowest layer so it is highest in the label element area. So we have to move the black block under the red color block. You click the black rectangle then click "to lower layer" option. Until the black block is under red block.
Or you can click red block then click “to upper layer”. Until the red block cover the black block. (Edit > to upper layer) The black block is under the red block.
【Delete layer】 Click the image you want to delete. In sample that will delete black block. First of all, click black block. Second, click edit then click delete.
Click “yes”. The black block is disappearing. 【Preview / Save image】 When you done your template. You should use “render template” to preview the template. Because of ESL is EPD panel. You have to check how the template is in real ESL.
The preview template will show in image area.
If you make sure the template is you want then you could save it. (File > Save as) If you want to modify the template, you could directly modify it. After modify, you have to use “render template” again to preview the template. After you click “save as”, you have to write some of description and template name in popup-window. After you are fill in information than click “ok”.
3.4.
Scheduler has four areas. They are display different task. Show is below： Coordinator：When you launch the NxScheduler.exe, the MAC address will auto bring in and display in coordinator area. Todo：Display each ESL status of transfer. There are respectively pending, transferring, transferred, wakeup, updating. Done：Display already done ESL. Output： Display whether read information from program of composer and display the process of execution.
4 Q&A Q：If If the ESL panel is broken or the image is incomplete, incomplete how can I do? A：First First of all you have to check the template and ESL size are match or not? If there are not match. Please re-select a template to fit with the ESL size. s If there both are match. Please to launch program of composer again. Second, you can check the program of NxEslscheduler.exe is working or not? Please lease contact us as soon as possible.
scanner was connected or not. Q：How How to print good barcode? A：Edit > Article > select goods to printing > left-click > Export Article BCR Image Q：How How to print label barcode? A：Edit > Labels > select labels to printing > left-click > Export Labels BCR Image Q：How How to print template barcode? barco A：Edit > Labels > select template to printing> printing left-click > Export Labels BCR Image (Template) how to make sure battery of ESL？ ESL Q：how A：Please reset ESL.
5 Appendix 5.1 Notice for cleaning and Safety Clean Screen – Please use lint free cloth to wipe ESL. Don't use water, chemical solvents and spray. Cover case – Use lint free cloth to wipe cover case. Safety tips Please do not change battery of ESL by yourself. Avoid dangerous, do not open cover case by yourself. Do not insert your fingers or any other object into the gap of case. Do not use wet rag to wipe the ESL in case of the spray or water leaks into the ESL.
5.2 Certification mark BSMI-D43021 Coordinator CE Coordinator 2.9” ESL P29205 2.9” ESL P29215 P292 FCC Coordinator 2.9” ESL P29205 2.9” ESL P29215 FCC ID : NOIEL-P00105 FCC ID : NOIEL-P29215 FCC ID : NOIEL-P29215 NCC Coordinator 2.9” ESL P29205 2.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
