User's Manual

GETTING START
■ Battery
This device contains a rechargeable battery. To charge your device’s
battery, use the micro USB cable which is included in your tablet
package.

■ Power on / Power off
Long press the Power button and wait for the device is on. To power
off, press and hold till screen shows menu list of option and select
it.
To enter standby mode, slide the Power switch once more. Slide the
switch again to continue the reading.
If your device suffers an unexpected error, just thrust the Reset
hole of bottom side, and the device will reboot itself immediately.
You have better to fully charge the battery before using the tablet
for the first time. The charging time is approximately 5 hours.

■ Insert / remove the microSD card
To install the microSD card, insert it in the slot and press until it
clicks into place. To remove the microSD card, press and remove it
from the same slot.

■ Transferring files
To transfer files between the tablet with computer, please follow the
steps:
1. Connect the microUSB cable to the microUSB port of the tablet and
insert the USB connector into a USB port of the computer. The
computer will identify this tablet as a Removable storage device
and the tablet will temporarily become inoperative from display
touch and other behaviors.
2. On the computer, select the files you wish to transfer to this
tablet and copy them onto the removable storage device.
3. Securely disconnect the USB to microUSB cable from the computer
and tablet when the transferring work is completed.

Do not disconnect the cable while files are transferring. If you are 
transferring them to a microSD card inside the device, do not remove the
card in the meantime.


■ Home Screen
From the Home screen you can access your current and recent drawing
and notes. You can also access your eBook library, configure the
device’s settings and connect to the Internet.
