User's Manual

GETTING STARTED
 Battery
This device contains a rechargeable battery. To charge your device’s
battery use the micro USB cable included with your EREADER Device.
 Switch on / switch off
Long press the Power button and wait for the device is on. To switch off,
Press and hold till screen shows “ √ ” option and select it.
To enter stand-by mode, slide the switch once. Slide the switch again to
continue the reading.
If your device suffers an expected error, just press the reset hole on
bottom side, and device will reboot itself.
You should fully charge the battery before using the E Reader Device for
the first time. The charging time is approximately 8 hours.
The computer must be on, not in sleep mode during charging.