User's Manual

IEEE802.11n Wireless 1T1R USB Adapter
- 24 -
RX ICV Error
Integrity Check Value receiving with error.
Reset Counter
Reset counters to zero.
2.3.3.8 Wi-Fi Protect Setup
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. This Adapter supports the configuration setup using PIN
configuration method or PBC configuration method. If the connected wireless Router/AP support
Wi-Fi Protected Setup (WPS), you can use this USB Adapter to establish a wireless connection
using either Push Button Configuration (PBC) method or PIN method.
Here we will introduce two ways to configure the QSS
(QSS is known as rapid security settings, by pressing the wireless router and this Adapter on the
QSS button to automatically set up WPA2 secure connection level without the router or network
adapter management software to conduct the cumbersome interface settings, greatly simplifying
the operation of the wireless security settings.)
Pin Code: 8-digit numbers. It is randomly generated from system.
1. PIN method
Click the button “Pin Input Config (PIN)”, and then come to the following figure.