User's Manual

IEEE802.11n Wireless 1T1R USB Adapter
- 30 -
SSID: AP name of user type.
Security Setting: Authentication mode and encryption algorithm used within the AP. System
default is no authentication and encryption.
Cancel: Cancel the above changes.
OK: Apply the above changes.
Network Authentication: Select the Security tab in the screen above. To define the security mode,
select the desired security mode as follows. There are 4 types supported: Open System, Shared
Key, WPA-PSK, WPA2-PSK. Please select a type from the drop down list.
Data Encryption:
Data encryption
There are 4 types supported: Disabled, WEP, TKIP and AES. The
available encryption selection will differ from the authentication type you
have chosen, the result is shown below:
Authentication
A
vailable Encryption Selection
Open System Disabled, WEP
Shared Key WEP
WPA-PSK, WPA2-PSK TKIP, AES
Note: Select different security options, the configurations are different; you can select the