User Manual

16
3. Select an encryption type and fill in the corresponding wireless network information:
Items Information
Authentication
Type
There are 7 types of authentication modes supported by Utility
including
open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
Encryption Type
For open and shared authentication mode, the selection of encryption
type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-
PSK
authentication mode, the encryption type supports both TKIP and AES.
802.1x
Use 802.1x to make WPA and WPA2 certification. This functions only
works when connecting to a WPA and WPA2 supported device.
WPA Pre-
shared
Key
This is the shared secret between AP and STA. For WPA-
PSK and
WPA2-
PSK authentication mode, this field must be filled with character
longer than 8 and less than 32 length.
WEP Key Only valid when using WEP encryption algorithm. The key must
matched
AP's key.
4. Specify the 802.1x information if you are using the 802.1X certification method.
Users that do not use this function or connecting to an open-wireless network please skip this
part.
Items Information
EAP method To select an EAP method.
Tunnel Authentication Select a Tunnel authentication mode.
Session Resumption Select to enable this function or unmark it to disable.