User Manual

Security Settings

This page pops up after clicking the Security Settings button. Please follow the instructions

below:

Items Information

1. Authentication Type Select to be open or WPA-PSK system.

2. Encryption Type Select an encryption type from the drop list.

3. WPA Pre-shared Key A shared string be

tween AP and STA. For

WPA-

PSK authentication mode, this field must

be filled with character longer than 8 and less

than 32 length. (PCI only)

4. Group Rekey Interval

Only valid when using WPA-

PSK encryption

algorithm. The key will change compliance

with s

econds or beacon that user set. (PCI

device only)

5. WEP Key

Only valid when using WEP encryption

algorithm. The key must match the key on AP.

There are several formats to enter the keys.

a. Hexadecimal (40bits): 10 Hex characters.

b. Hexadecimal (128bits): 32Hex characters.

c. ASCII (40bits): 5 ASCII characters.

d. ASCII (128bits): 13 ASCII characters.