User Manual

WPS Configuration

This page provides users to connect this adapter to a WPS (Wi-Fi Protected Setup) AP. Those

available WPS supported AP are listed on the upper column. Select the AP that you want to

connect to and click the Connect button to activate.

WPS Associate IE:

If the "WPS Associate IE" option is checked, station sends a association request with WPS IE

during WPS setup.

WPS Probe IE:

If the "WPS Probe IE" option is checked, station probes a request with WPS IE during WPS setup.

Re-scanning:

Click the Rescan button to perform the re-scanning.

WPS AP Information:

Click the WPS information button to bring up the WPS capable AP information dialog window.

The window shows the information including:

Authentication Type:

There are three types of supported authentication modes including Open, Shared, WPA-PSK and

WPA modes.

Encryption Type:

For Open and Shared authentication modes, the available encryption types are None and WEP.

For WPA, WPA2, WPA-PSK and WPA2-PSK authentication modes, the available encryption types

are TKIP and AES.