User Manual

5
Key Features
 Complies with IEEE 802.11n/b/g wireless
standard
 Supports wireless data encryption with
64/128-bit WEP, WPA, WPA2
 2.4GHz Frequency band, MIMO 1T2R  Supports QoS: WMM, WMM-PS
 Complies with Universal Serial Bus Rev. 1.1 and
2.0 specifications
 Supports Multiple BSSID
 High speed transfer TX rate up to 150 Mbps
 High speed transfer RX rate up to 300 Mbps
 Supports auto-installation
 Supports driver for Windows 2000, XP 32/64,
Vista 32/64, Linux (2.4.x/2.6.x), and Mac
(10.3.x/10.4.x)
Installation Guide
Software Installation
Note:
 For Linux or Mac driver installation guide, please refer to the instruction in
/Driver/Linux/README or /Driver/Mac/README in the CD-Rom.
 The following driver installation guide uses Windows XP as the presumed operation system. The
procedures and screens in Windows 2000 and Vista are familiar with Windows XP.
1. Insert this product to your computer. The system finds the newly installed device
automatically. Click Cancel to close this window.
2. Insert the CD-Rom that came with this product to your CD-Rom drive. The menu window pops
up automatically. Please click the Driver button of this product.
Note: If the CD-Rom fails to auto-run, please click on My Computer > your CD-Rom drive
> (folder of this product) > Driver then double-click the Setup icon to start this menu.