User's Manual

The window shows the information including:

Items Information

Authentication Type

There are three types of supported authentication modes including

Open,

Shared, WPA-PSK and WPA modes.

Encryption Type

For Open and Shared authentication modes, the available encryption

types are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-

PSK

authentication modes, the available encryption types are TKIP and AES.

Config Methods

This attribute contains the config methods supported and enabled by the

selected Registrar.

Device Password ID

Device Password ID indicates the method or identifies the specific

password that the selected Registrar intends to use.

Selected Registrar

Selected Registrar indicates if the user has recently activated a Registrar

to add an Enrollee.

State

This attribute is used to indicate the current configuration state. This

attribute is either "Un-configured" or "Configured".

Version This attribute is the specified WPS version.

AP Setup Locked AP Setup Locked indicates if AP has entered a setup locked state.

UUID-E UUID-E is universally unique identifier (UUID) generated by the

Enrollee.

RF Bands RF Bands indicate the available RF bands.

4. Pin Code: 8-digit numbers. It is required to enter PIN Code into Registrar using PIN method.

Each Network card has only one PIN Code of Enrollee. Click on the Renew button to renew the

PIN code.

5. Config Mode: Enrollee or an external Registrar.

6. Detail: Information about Security and Key in the credential.

7. Connect: Command to connect to the selected network inside credentials.

8. Rotate: Command to connect to the next network inside credentials.