User's Manual

1. SSID: AP name of user type. User also can select [Use Mac Address] to display it.

2. Wireless Mode: Select wireless mode. 802.11 B/G mix, 802.11B only, 802.11G only and

802.11 B/G/N mix mode are supported. When wireless card is 802.11N, system default is

802.11 B/G/N mix; Otherwise system default is 802.11 B/G mix (802.11 B/G/N mix selection

item only exists for B/G/N adapter).

Note: Wireless mode is not support for Vista.

3. Country Region Code: eight countries to choose. Country channel list:

Classification Range

0: FCC (Canada) CH1 ~ CH11

1: ETSI CH1 ~ CH13

2: SPAIN CH10 ~ CH11

3: FRANCE CH10 ~ CH13

4: MKK CH14 ~ CH14

5: MKKI (TELEC) CH1 ~ CH14

6: ISRAEL CH3 ~ CH9

7: ISRAEL CH5 ~ CH13

Note: Country Region code is not support for Vista.

4. Beacon (ms): The time between two beacons. System default is 100 ms.

5. TX Power: Manually force the AP transmits power. System default is 100%.

6. Idle Time: Manually force the Idle Time using selected value. Default is 300.

7. Channel: Manually force the AP using the channel. System default is channel 1.

8. Use Mac Address: Use MAC address of used wireless card to be AP name. System default is

APX (X is last number of Mac Address).

9. Security Setting: Authentication mode and encryption algorithm used within the AP. System

default is no authentication and encryption.

10. No forwarding among wireless clients: No beacon among wireless client, clients can

share information each other. System default is no forwarding.

11. Hide SSID: Prevent this AP from recognized in wireless network. This is disabled as default.

12. Allow BW40 MHz: Allow BW40 MHz capability.

13. Default: Use system default value.

14. Apply: Apply the above changes.