User Manual
Table Of Contents
- AirMagnet A5200 Sensor User Guide
- Hardware Warranty
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Getting Started
- Chapter 3: Installing A5200 Sensor
- Appendix A: A5200 Sensor Specifications
- Appednix B: A5200 Standard Antennas
- Index
12 Chapter 2: Getting Started
AirMagnet A5200 Sensor User Guide
Figure 2-6:Applying tamper-evident seals
Important Make sure that the seals are applied approximately evenly
(50%-50%) to the bottom and the cover of the module, as only one
part of the seal needs to be removed to defeat the seal.
4) Firmly press the seal ends to cover the seam between the bottom
and the cover of the module.
Important Firmly press the entire seal surface onto the module
surface to ensure the best adhesion possible.
5) Record the seal serial numbers and confirm their presence in later
module inspections.
6) Allow 24 hours for the seal adhesive to dry completely.
Seal 2
Seal 1
A5200 Sensor User Guide.book Page 12 Thursday, January 15, 2009 2:00 PM