User Manual

14 Chapter 3: Installing A5200 Sensor
AirMagnet A5200 Sensor User Guide
To install the A5200 Sensor on counter top:
1) Place the A5200 Sensor on a desired counter top, making sure
that the four rubber pads stay on the bottom of the Sensor for
traction.
2) Connect the Sensor to the LAN using an RJ-45 cable.
3) Connect the Sensor to the power source, unless PoE is used.
Mounting the A5200 Sensor on a Wall
The A5200 Sensor can be mounted on any vertical surface, such as a
wall, using the AirMagnet A5231 Sensor Mounting Bracket.
The A5231 Sensor Mounting Bracket is sold separately. To order the
mounting bracket, contact your AirMagnet reseller or AirMagnet sales.
1) Select the ideal location on a wall with good FOV.
2) Install the A5231 Mounting Bracket, with the four metal feet
facing away from the wall.
3) Remove the four rubber pads from the back of the A5200 Sensor.
4) Align four holes in the back of the Sensor with the metal feet on
the Mounting Bracket.
5) Press the Sensor down slightly to make sure that the metal feet
are fully engaged with the body of the Sensor.
6) Slide the Sensor gently downward until the tab of the Mounting
Bracket clicks onto the Sensor.
Installing A5200 Sensor on a T-Rail
The ceiling of a building is an ideal place for installing the Sensor in
terms of FOV. With the A5231 Mounting Bracket, you can place the
Sensor anywhere on a T-rail on the ceiling.
To install the Sensor on a T-rail:
1) Slide the Sensor onto the Mounting Bracket, making sure that the
Sensor and the Mounting Bracket are fully engaged.
2) Install the A5231 Mounting Bracket on a T-rail.
A5200 Sensor User Guide.book Page 14 Thursday, January 15, 2009 2:00 PM