User Manual

AirMagnet A5205 Sensor User Guide
Chapter 2: Getting Started 9
A5205 Bottom Cover
Figure 2-6 shows the bottom cover of the A5205 Sensor. The A5205
Sensor comes with four removable rubber pads on its bottom cover
(shown in the picture below). They help prevent the Sensor from
skidding when deployed on a flat surface, without using the A5231
Mounting Bracket. However, these rubber pads must be removed
when mounting the Sensor onto the Mounting Bracket. See “Chapter
3: A5205 Sensor Installation” for more information.
Figure 2-5: A5205 Sensor Bottom Cover
Applying Tamper-Evident Seals
The tamper-evident seals are intended to prevent tampering of the
AirMagnet SmartEdge Sensors and help network administrators to
easily identify traces of tampering should it have occurred. To
effectively use the tamper-evident seals, care must be taken to ensure
that the seals are applied properly.
A5205 Sensor User Guide.book Page 9 Thursday, January 15, 2009 1:46 PM