User's Manual
Table Of Contents
- Chapter I: Product Information
- CHAPTER II: Driver Installation and Configuration
- 2-1 Network Adapter Installation
- 2-2 Connect to Wireless Access Point
- 2-2-1 Using Realtek Utility
- NOTE: If you insert the USB wireless network adapter into an USB 3.0 port and connect to an 11ac AP, device driver will doing auto USB mode switch and shown the message as below photo, or you will heard sounds of USB insert or unplug, this is the norm...
- 2-2-2 Using Windows Zero Configuration
- 2-3 Connection Profile Management
- 2-3-1 Add a New Profile
- 2-3-2 Remove an Existing Profile
- If you have added a profile before, and you wish to change the content of the profile, you can use this function. Please select a profile from the list first, then click ‘Edit’ button. You’ll be provided with the contents of selected profile, and you ...
- 2-3-4 Make a Copy of an Existing Profile
- 2-4 View Network Statistics, General Information, and Status
- 2-4-1 General Information
- 2-4-2 Status
- 2-5 Miscellaneous Settings
- 2-6 Establish a Secure Connection with AP by WPS
- 3-1 Switch to AP Mode and Station Mode
- 3-1-2 Setup Soft-AP Security
- 3-2 Advanced Settings
- 3-3 Wireless Statistics
- 3-4 Internet Connection Sharing (ICS)
- 4-1 Hardware Specification
- 4-2 Troubleshooting
- 4-3 Glossary
2
1-2 Safety Information
In order to keep the safety of users and your properties, use the
following safety instructions:
1. This USB wireless network adapter is designed for indoor use only.
DO NOT expose this network adapter to direct sun light, rain, or snow.
2. DO NOT put this network adapter at or near hot or humid places, like
kitchen or bathroom. Also, do not left this wireless network adapter in the
car in summer.
3. This network adapter is small enough to put in a child’s mouth, and it
could cause serious injury or could be fatal. If they throw the network
adapter, the adapter will be damaged. PLEASE KEEP THIS NETWORK
ADAPTER OUT THE REACH OF CHILDREN!
4. This network adapter will become hot when being used for long time
(This is normal and is not a malfunction). DO NOT put the network
adapter on a paper, cloth, or other flammable objects after the network
adapter has been used for a long time.
5. There’s no user-serviceable part inside the network adapter. If you
found that the network adapter is not working properly, please contact
your dealer of purchase and ask for help. DO NOT disassemble the
network adapter by yourself, warranty will be void.
6. If the network adapter falls into water, DO NOT USE IT AGAIN
BEFORE YOU SEND THE ADAPTER TO THE DEALER OF
PURCHASE FOR INSPECTION.
7. If you smell something strange or even see some smoke coming out
from the network adapter, switch the computer off immediately, and call
dealer of purchase for help.