Instructions

Safety
10
WARNING
Falling parts
The NEA/NEG or parts of the construction can come loose due to vibra-
tion. Falling parts can lead to severe personal injuries.
 Use only suitable fastening screws and safety washer to attach the
NEA/NEG.
For attachment Netter Vibration recommends using Netter fastening
kits NBS.
 Check the fastening screws after one hour of operation and thereafter
regularly (generally monthly).
 Retighten the fastening screws, if necessary. Use a torque wrench and
tighten the screws crosswise.
 In critical installation situations suitable securing is mandatory.
WARNING
Risk of injury due to rotating unbalances
During operation of the NEA/NEG without unbalance covers there is risk of
injury due to rotating unbalances.
 Operate the NEA/NEG only with mounted unbalance covers.
CAUTION
Risk of burns due to hot surfaces
NEA/NEG can strongly heat up during operation. Direct contact may cause
burns.
 Do not touch the NEA/NEG or the cable near the cable gland during
operation or shortly after being switched off.
 Only operate the vibrators within the permissible ambient temperature,
according to Ch. Technical data, page 11.
Falling parts
Rotating
Unbalances
Hot surfaces